HPE Says Its FAA Juniper Routers Worked As Intended

Routers at two FAA sites triggered 1,000 connection attempts per second, grounding flights for over four hours as investigators weigh config vs. legacy network limits

Rex Edison Avatar
Rex Edison Avatar

By

Image: Deposit Photos

Key Takeaways

Key Takeaways

  • Two Juniper routers flooded FAA systems with 1,000 connection attempts every four to five seconds.
  • HPE claims routers followed configuration settings correctly, leaving fault placement still unresolved by investigators.
  • Disruptions canceled over 14,000 flights across Friday and Saturday after a four-hour nationwide ground stop.

An HPE spokesperson told reporters that the two Juniper routers at the center of the November 13, 2026 FAA ground stop “functioned as configured to by the installer” and “did not fail or act improperly.” That statement is a corporate defense, not a clearance, and investigators have not yet established who made the configuration choices that mattered. This case echoes other high-profile network disruption events where misconfiguration brought critical systems offline.

On the evening of November 13, the FAA’s telecommunications infrastructure absorbed roughly 1,000 connection attempts every four to five seconds. The flood destabilized radar and communications systems across 17 of the agency’s 22 air-route traffic-control centers, prompting the FAA to halt departures nationwide.

The ground stop lasted more than four hours before the agency lifted it at approximately 8:15 p.m. Eastern time.

The first symptoms appeared at the Indianapolis control center, where controllers reported static and intermittent communications. The initial investigation points to two specific sites as sources of the excessive traffic: an FAA radio installation in El Dorado, Arkansas, and a radar site in Amarillo, Texas.

Both sites ran Juniper Networks routers. L3Harris, the FAA’s current network service provider, had deployed equipment at the El Dorado site. HPE acquired Juniper for approximately $14 billion, completing the transaction in July 2025, and is now the manufacturer answering questions about the hardware.

The technical issue, in plain terms, works like this. A broadcasting feature on the routers appears to have pushed data more broadly across the network than the FAA’s older infrastructure could handle. HPE said the routers did not fail or act improperly; the FAA’s investigation has not yet resolved whether the problem arose from the equipment itself, the installation, the configuration, or the capacity of the legacy network.

Transportation Secretary Sean Duffy said the FAA disabled that broadcasting feature on the two affected routers as a precaution. The FAA also disabled the same functionality on approximately 60 similar routers across its network before communications stabilized.

Investigators must determine whether the feature was unsuitable for the FAA environment, improperly enabled, or incorrectly configured. A fourth possibility is that it simply exposed a capacity ceiling the legacy network was never built to handle.

Both routers are being examined at an L3Harris laboratory in Florida. The FAA is working with the FBI and other law-enforcement agencies on the investigation, and officials have said they found no evidence of a cyberattack. L3Harris said it is supporting the investigation.

The travel consequences were severe. More than 14,000 flights were canceled on Friday and Saturday combined following the ground stop. Nearly 2,300 additional U.S. cancellations were reported Sunday afternoon as airlines worked to rebuild disrupted schedules.

What remains unresolved matters. A device can follow its programming and still cripple a nationwide communications network. Investigators are still working to place the fault, whether it lies in the hardware design, the installation, the configuration, or the age of the infrastructure itself.

Share this

At Gadget Review, our guides, reviews, and news are driven by thorough human expertise and use our Trust Rating system and the True Score. AI assists in refining our editorial process, ensuring that every article is engaging, clear and succinct. See how we write our content here →