Every once in a while, you’ll always need to run through your car to make sure that everything under the hood is alright. You’ll have to check the oil, the tyres and the battery, but more often than not, most people forget to check the status of brake fluid. This sometimes leads to the brakes being unresponsive, and this might be very fatal especially if it happens when you’re driving. This normally happens as a result of trapped air in the brake system, and to deal with this issue, you’re going to need a brake bleeder kit like the Phoenix systems reverse brake bleeder. Could it be the best brake bleeder kit for you? Read on and find out.
Why We Like It – Phoenix Systems (2104-B) V-5 Reverse Brake Bleeder
Once you use the V-5 reverse brake bleeder for bleeding brakes, you’ll never have to deal with a spongy pedal again. You’ll say goodbye to making trips to your local mechanic every so often, and never have to panic whenever you suspect that there might be an air bubble in your brake line.
There are a lot of different methods that you can use to perform brake bleeding on your car. Unlike the conventional Motive Products European Bleeder Pressure kit, the Phoenix Systems DIY reverse brake bleeder works by primarily pushing brake fluid out from the bottom up, and this allows you to refill and bleed a completely dry brake or clutch system. While reverse bleeding may be the best method to get rid of any air pockets in your brake line, the V-5 light duty reverse bleeder is also capable of reverse vacuum, pressure and bench brake bleeding, and the best thing about all of this is that it can all be done by one person.
The V-5 light duty reverse bleeder has a very innovative design that allows one man to perform four different bleeding functions with it. It comes with a clear hose, a couple of adapters and the vacuum gun, but it doesn’t include an air compressor or a pressure gauge. Despite this, the kit is easily portable, and feels quite solid to the touch. If you’d like to have something that comes with a longer silicone hose, then you should take a look at the Capri Tools Vacuum Brake Bleeder kit.
Using the V-5 clutch bleeder will help you save a lot of time whenever you need to bleed your brakes. It will allow you to flush out any air pockets that may exist in your car’s master cylinder in less than 10 minutes, and all this will be done without the need to ask for anyone’s help. The kit also comes with a 90-day warranty, though we would’ve been a lot more satisfied if the period would last for a year like that of the Motive Products Pressure Clutch Bleeder kit.
Phoenix Systems (2104-B) V-5 Reverse Brake Bleeder Wrap Up
The Phoenix Systems V-5 brake bleeder is all you need to make sure that your car brakes never let you down. It’s easy to use, portable and will have you spending no more than 10 minutes bleeding your brakes.
Also why not check out:
- ARES 70921 2L Manual Brake Fluid Pressure Bleeder Review
- Capri Tools Vacuum Brake Bleeder Review
- FEMOR Hand Held Brake Bleeder & Vacuum Pump Test Tuner Kit
- HFS (R 2 in 1 Brake Bleeder & Vacuum Pump Test Tuner Tool Kit Review
- HTOMT Automotive Protected Adapters Bleeding Review
- Motive Products European Bleeder Pressure Review
- Motive Products Pressure Clutch Bleeder R
- Motive Products System Bleeder Trucks Review
- Power Probe BAKIT01 Master Brake Bleeder Kit Review