What is the use of having the best TV if you’re not setting it at the perfect viewing angle? There’s a wide range of TV wall mounts. Understanding what separates a TV articulating vs tilting wall mount is crucial to help you make the most of your space. And If you want to enhance your viewing experience further, check out the difference between your TV’s backlight vs brightness settings.

KEY TAKEAWAYS:

  • Articulating TVs mounts are suitable for areas that require multiple viewing points.
  • Tilting wall mounts are helpful for TVs placed above eye level or close to the ceiling.
  • Because of the intricate parts, articulating mounts cost much more than the average tilting mount.

Differences Between Full Motion TV Wall Mount vs Tilt

Both articulating mounts (also known as full-motion mounts) and tilt mounts offer TVs with a varying range of motion. However, each one is better used in different settings and seating arrangements.

Insider Tip

A general rule is that a single stud can carry 80 lbs. Most TVs under 60″ are less than 80 lbs.

A full-motion mount has a robot-like arm that extends with pivots, joints, and hinges, allowing it to swivel and move. On the other hand, a tilt mount can tilt a screen up or down about 45 degrees. These different movement designs provide specific sturdiness and motion advantages in particular settings.

Range of Movement

The articulating mount gets the blue ribbon for offering the widest range of movement and angles. This factor makes full-motion TV mounts excellent for dealing with a screen that you want to view from multiple points in a room. This versatile mount is also handy for when you’re finished watching because you can push the extendable arm back in and save valuable space. They are also known to do great in corner spaces.

A tilt mount is marvelous for TVs placed above eye level or in areas where viewers will be lying down, like a bedroom. Because there won’t be much need to move the TV or switch viewing positions, having a wall mount that tilts can be great for finding the exact viewing angle you need.

Another critical area to consider in your viewing experience is screen resolution. You can check out this resource showing the differences between 1080i vs 1080p to learn more.

Supporting Weight

Because mounts are often designed with a single extending arm with several points of pivoting and turning, articulating wall mounts usually have a lower maximum weight than a tilt mounting bracket. Tilt brackets tend to have sturdier designs, allowing them to handle larger and bulkier TVs.

Of course, the max weight for that mount’s hold depends on the type of wood studs and how well your mount is secured.

Warning

Always check the manufacturer’s specifications to determine the mounting weight capacities. These specifications should always come in the box with the television.

F.A.Q.S

What is a Flat TV Mount?

A flat TV mount holds your TV very close to the wall, making it look like a hanging piece of art. You cannot adjust the viewing angle with flat TV mounts, so make sure it is at the exact right spot before installing.


What is the best height to put your TV wall mount?

The height of the TV mount is up to the viewer’s preference, but many say that putting the screen at eye level is the optimal point. The height also depends on the size of the TV and the necessary viewing angle.


Should a wall-mounted TV be tilted?

Using a tilted mount can eliminate any glare by altering the viewing angle. It also can be adjusted to reduce eye and neck strain.



STAT: For TVs that will be mounted more than 42-inches above the floor, it’s recommended that people use a tilting mount. (source)

Christen Costa

Grew up back East, got sick of the cold and headed West. Since I was small I have been pushing buttons - both electronic and human. With an insatiable need for tech I thought "why not start a blog focusing on technology, and use my dislikes and likes to post on gadgets."

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *