How to Wire Manage a Standing Desk

Many people have wires around their desk, and sometimes, you want to know how to wire manage a standing desk. These cords sometimes seem to multiply as they loop around different items. However, wire management helps clean up the best standing desks.

You could feel overwhelmed by all the wires required for a standing desk, computer, computer monitor, and phone. If this feeling is familiar to you, you may want to try a wire management solution such as velcro, zip ties, mounted power strip, cable tray, cable chain, cable sleeves, or wire box. While you revamp your space, you should consider how to set up a standing desk for ergonomics as well as how to organize your standing desk.

Managing Wires at a Standing Desk

Many users feel that their desks look messy with wires lying everywhere, and they prefer to use a wire management system. Wire management can gather your cords in one place and easily stow them under your desk or along the side. If you have used your standing desk a lot, you may want to know how to repair a standing desk motor. Or if your desk is beyond repair, you can check out the best Autonomous standing desks for a new one. Alternatively, you can learn how to make a standing wall desk if you don’t want to worry about a motor dying or other moving parts failing.

As a result, both horizontal and vertical solutions exist. When you use a vertical solution, you may end up with cords visible on the desk and floor. Meanwhile, a horizontal product leaves your wires hanging under your desk separately. If you combine multiple types of wire management, you could eliminate as many of these visible wires as possible. Be careful when using a height-adjustable design desk, and put the power cables where they won’t get in the way.

Method 1: Power Strip

Some power strips feature holes on the ends for screws, perfect for mounting under a desk. These power strips typically include multiple outlets for your devices, but they may not contain a power surge protector. In addition, some provide both alternating current (AC) and USB slots, while others have only AC.

STEP 1

Drill holes into the bottom of the desk. If you use a drill, be careful not to drill through the top of your desk.

STEP 2

Attach the power strip to the bottom of the desk using the screws.

STEP 3

Plug your wires into their sockets and enjoy your clean table. Make sure your power cables won’t block your height adjustable desk’s position changes.

Method 2: Gathering Cords

Some professionals know a couple of zip ties or a velcro strip can tidy up any workspace. However, these products typically work best for a small number of cords or a bunch of thin wires. If you have a lot of thick cables, the zip ties might not fit, or the velcro strip won’t hold.

STEP 1

Gather your wires.

STEP 2

Wrap the bundle of wires in velcro or zip ties.

STEP 3

Attach the wrapped cords to the leg of the desk. Make sure to leave the adjustable part of the desk open.

Method 3: Wire Tray or Box

When you want a horizontal solution, you’re likely to find a designated wire tray or wire box ideal. Both of these options come in smaller and larger sizes. A large cable management tray or box may span the width of your desk, allowing you to put many cords inside if the tray or box is deep enough.

STEP 1

Grab your cables all at once or one by one.

STEP 2

Attach to the top or edge of the desk using a screwdriver If you choose a tray.

STEP 3

Add power strips to the new wire management system, as well as the wires for your electronics.

F.A.Q.S