Hoverboards are a fantastic way to spend your leisure time, as they allow for balance-based movement. However, if you want to acquire a new hoverboard or are looking for a perfect gift for your kid, you may want to personally inspect the device to make sure it is safe.

KEY TAKEAWAYS:

  • Calibrating a hoverboard can solve issues in alignment and steering.
  • After resetting the board, it will restore its factory settings to be like new.
  • You can recalibrate a hoverboard in minutes without any tools.

Hoverboard Testing Explained

There are a number of ways you can personally perform a safety inspection on your newly purchased hoverboard. Once you have received a satisfactory result, you can be assured your child will be safe as they ride around the neighborhood.

Tips for Safety Testing a Hoverboard

There are a number of quick safety checks you can easily perform before taking a hoverboard out for a ride. Here are a few ways to help you rest easy and enjoy your hoverboard.

Battery Check

You can easily make sure the hoverboard’s lithium-ion battery is functioning properly with some due diligence. Be sure you only take the hoverboard out for a ride after it has received a full charge. To quickly check the battery status, plug the charging port into a power outlet and take a look at the battery indicator light. If it is green, then you are good to go. Additionally, if you own a multimeter or a similar voltage measurement device, you can perform a more thorough battery check.

Red Light Inspection

Most modern hoverboards feature a red LED light that is used to alert the owner to a wide range of potential problems with the board itself. These lights flash in regular patterns, each with its own meaning.

  1. One light flashing typically indicates loose wiring somewhere within the internal circuitry.
  2. If the light blinks two or three times in a pattern it may indicate a circuit board issue. In most cases, circuit board issues arise from water damage.
  3. Lights that blink four or five times in a repeating pattern typically indicate a hoverboard motor malfunction.
  4. A light that blinks six times in a row generally alerts owners to a dead or faulty battery.
  5. If your light is blinking seven or eight times in a row, that means your gyroscopes or internal sensors are having some trouble.

Calibration and Sensor Reset

If your hoverboard is feeling sluggish, movement-wise, it may be time to perform a calibration test and undergo the sensor reset procedure. The steps that make up these two processes vary depending on make and model, though there are typically some commonalities. Make sure your hoverboard is fully charged and powered down, then hold down the power button until you hear a beep. Allow your board to complete the procedure, then power it down after a minute or so. You should be good to go.

F.A.Q.S

How do you test a hoverboard for battery health?

Simply check out the battery indicator light. If it is green, that means the board is fully charged. Additionally, if the red LED alert light is blinking six times in a row, that could mean you have a faulty battery.


How do I recalibrate the hoverboard’s sensors and gyroscope?

Most hoverboards feature a full sensor reset function, which typically starts by holding down the power button until the unit beeps.


Are hoverboards safe?

Generally speaking, modern hoverboards are safe, though you should practice caution during use. We would recommend hoverboard riders wear safety gear and follow the rules of the road.



STAT: (source)

Lawrence Bonk

Lawrence Bonk is a copywriter with a decade of experience in the tech space, with columns appearing in Engadget, Huffington Post and CBS, among others. He has a cat named Cinnamon.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *