How to Replace the Ozone Plates on Air Purifier

If you have recently purchased one of the best air purifiers like the ozone generator or ionic, you may have one thing on your mind. How to replace ozone plates on an air purifier? We have created this easy-to-use guide on swapping plates.

KEY TAKEAWAYS:

  • Ozone plates should be cleaned regularly with a cleaning solution made from bleach, vinegar, water.
  • Removing the ozone plate should be easy, as the plate should slide right out. This process may differ depending on the design of your generator.
  • As for replacing an ozone plate, be sure you have purchased a replacement plate that can integrate with your specific ozone generator.

What is an Ozone Plate?

Before you can know how to swap out an ozone plate, it can be helpful to know exactly what an ozone plate is. Basically, ozone generators create ozone within the confines of an ozone plate. These plates act as a sort of breeding ground for the ozone before the particles are sent off into your living area.

Insider Tip

Ozone generators create ozone within the confines of an ozone plate. These plates act as a sort of breeding ground for the ozone before the particles are sent off into your living area.

Do Ozone Plates Need to be Cleaned?

Yes. As part of the ozone-generating process, the ozone plate can become dirty and clogged over time, which impacts the efficacy of your air purifier including how many times an air purifier changes the air per hour. They can develop a transparent film over time that can be difficult to see with the naked eye, so you will have to clean the plates regularly as a dirty ozone plate will make treatments less effective.

How Do You Clean an Ozone Plate?

Ozone plates are relatively simple to clean. You should be able to slide the plate out of the ozone generator, though the process will differ depending on your make and model. Once you have your hands on the ozone plate, begin the cleaning process by grabbing a brush and mixing together a cleaning agent using vinegar, bleach, and water. Scrub the plate gently and give it time to dry. We recommend allowing a fair amount of time for the plate to dry, as using a moist plate can damage the ozone generator.

Additionally, make sure you understand when you need to change a filter to ensure your air purifier is performing at maximum capacity.

Insider Tip

Once you have your hands on the ozone plate, begin the cleaning process by grabbing a brush and mixing together a cleaning agent using vinegar, bleach, and water.

How Do You Swap Out an Ozone Plate?

The specific process of swapping out an ozone plate will differ depending on the make and model of your ozone generator, but there are some commonalities.

Check the Instruction Manual

The most important step here is to check with the instructions or quick start guide that accompanied the ozone generator. These instructions should lay out the whole process in detail.

Make Sure Your Replacement Plates Fit

When shopping for a replacement plate, make sure it has been designed to fit your specific model of ozone generator. There are many types of generators out there and very few can accept every plate on the market. An online shop listing should explain what models the plate can work for.

Warning

We recommend allowing a fair amount of time for the plate to dry, as using a moist plate can damage the ozone generator.

F.A.Q.

How do you use an ozone generator at home?

Find a good spot for the ozone generator that is not too close to walls or obstacles. Power it on and let it run for a few hours or as long as you deem necessary.


Do ozone plates wear out?

Ozone plates will not typically wear out as long as you clean them regularly. An ozone plate should be cleaned once every one to three months.


Is ozone healthy or harmful?

The data is inconclusive, though ozone is likely unhealthy in large doses throughout a long period of time. Use your best judgment when it comes to the use of ozone.



STAT: The global ozone generator market size was valued at USD 608.4 million in 2019 and is expected to grow at a compound annual growth rate (CAGR) of 6.9% over the forecast period. (source)

Lawrence Bonk

Lawrence Bonk is a copywriter with a decade of experience in the tech space, with columns appearing in Engadget, Huffington Post and CBS, among others. He has a cat named Cinnamon.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *